QUAD-7850

CLICK ANY IMAGE TO ENLARGE

 

 

QUAD-7850

 

Bybyte is proud to introduce the smallest and powerful solution for your car computer project.  This  beautiful 4 channel amplifier delivers 4 x 50 Watts of high quality audio.

 

Measuring only 70 x 65 x 30 mm the new TDA7850 internal amplifier can be installed inside the Black Box double din enclosure saving space, time and the need of power and audio extensions running through out your car.

 

Parts Included:

 1 -  4 x 50 Watt Amplifier kit

 1 - 6 feet 3.5mm stereo to 2 RCA cable

 4 -  6mm(H) adhesive pcb support

 2 -  6" power cables

 1 -  12V 20A relay

 1 - Screw

 2 - Flat connectors
Specifications

FEATURES:

■ High output power capability:

– 4 x 50 W/4 Ω max.

– 4 x 30 W/4 Ω @ 14.4 V, 1 kHz, 10 %

– 4 x 80 W/2 Ω max.

– 4 x 55 W/2 Ω @ 14.4V, 1 kHz, 10 %

■ MOSFET output power stage

■ Excellent 2 Ω driving capability

■ Power input: 12 DC V

■ Hi-Fi class distortion

■ Low output noise

■ ST-BY function

■ Mute function

■ Auto mute at min. supply voltage detection

■ Low external component count:

– Internally fixed gain (26 dB)

– No external compensation

– No bootstrap capacitors

■ On board 0.35 A high side driver

■ Dimensions(mm): 70 (W) x 65(D) x 30 (H)

■ Inputs: Quad RCA connector &  power 

    terminal block

■ Outputs: 4x2 terminal blocks

■ Heat dissipation: Anodized aluminum heat

    sink

 

PROTECTIONS

■ Output short circuit to gnd, to Vs, across the

    load

■ Very inductive loads

■ Overrating chip temperature with soft thermal

    limiter

■ Output DC offset detection

■ Load dump voltage

■ Fortuitous open

■ Reversed battery

  

POWER RELAY

Although the amplifier has pop noise suppression, the 20A relay can be used to power up the amplifier with the aid of an automotive power supply with “Anti-thump” protection. You can also opt by powering the amplifier directly to a regulated 12V source.

 

Download installation guide

 

ORDER NOW

$69.99USD

RELATED ITEMS

SP8-22

 

 

 

 

8 Contacts Speakers Wire Harness

 

72-ST35P-2RCAP

 

 

 

 

6' -  3.5mm Stereo Plug

 to RCA Plug Cable

 

6-ST35P-2RCAJ

 

 

 

 

 

6" 3.5mm Stereo Plug / 2 RCA Jack cable

 

 

 

 

DTA45

CLICK ANY IMAGE TO ENLARGE

 

 

 

DTA45

 

The new Series DTA45 internal amplifier provides a powerful compact solution for your Carputer project audio. No need of expensive external amplifiers or running long audio and power extensions though out your vehicle.

Measuring only 105 x 63mm  is ideal to power up to 2x125Watt or 4x35 Watt speakers surpassing many OEM radio head unit's performance.

 

Parts Included:

- 1 x 45 Watt Amplifier kit

- 4 x 6mm(H) adhesive pcb support

- 1 power cable and 1 audio input cable

- Compatible with the Double Din LCD frame
More details

Features:

●12V DC @ 3.5 AMP Single supply operation

●  110mm (L) x 63mm (W) x 30mm (H)

● Can be connected directly to the board's audio headers
 ● “Audiophile” Quality Sound
 ● High Power Class T architecture
 ● High Efficiency
 ● Dynamic Range = 102 dB
 ● Turn-on & turn-off pop suppression
 ● Over-current protection
 ● Over-temperature protection
 ● Strong enough to power 4x45 watt or 2x75watt speakers

● Dynamic Range = 103 dB
 ● Up to 2X25Wrms @ 4Ohm, VDD=14.6V
 ●  Mute inputs

 

Download installation guide

 

 

ORDER NOW

$39.99USD

 

FL-GL400

 

 

 

 

 

Ground loop

isolator

 

SP8-20

 

 

 

 

 

8 Contacts Speakers Wire Harness with 4mm pitch Molex  Sockets